Free Shipping on this item to locations with normal delivery access in the U.S. 48 states; locations in Alaska, Hawaii, and outside the U.S. require additional shipping charges. Locations with limited access may require pickup at your local terminal for free shipping.

For Truck shipments, you must be able to unload the items at the delivery point (lift gate service is extra, please order if needed). Delivery pickup at the terminal can also be requested.

*We have a credit card sales limit of $1500.00 or less. All orders over $1500.00 should be paid for by personal, business, or cashier's check, postal money order(s) or finance contract (see our web page for financing options).

All items paid for by credit card and shipped by UPS are sent signature required. If no one will be at the location for delivery, then payment should be by check, so the package can be delivered without a signature.

Features/Specifications

Model HPD-26QHSS is a skid steer mount post driver with all hydrualic adjustment (hydraulic tilt front to back and side to side), and this model has the Q-Technology with quick change rod seal and bearings

Driver wt. is 1404 lbs. and ships by truck

This driver requires a return line kit to operate correctly (this unit uses a non-pressurized hydraulic fluid return line which can not just connect to the auxiliary pressure return connection. The return line kit allows you to connect correctly at the fill cap on your loader's hydraulic fluid reservoir

Return line kits for skid steer mounted post drivers. Return line kits are required for all MSS and HSS (except HSS/P) models. These kits contain fittings to allow the oil to be returned to the hydraulic reservoir.

Please see below for the available kits and note the item number needed, and then order in the drop down menu above marked "Return Line Kits" . All kits weigh 5 to 7 lbs. depending upon the kit.


Item No. 814905 - For most Bobcat models EXCEPT 773G and 873G) and the other models shown below (S&T models), for reservoirs with an approximately 4 inch diameter screw typ plastic cap, wt. of kit is 5 lbs.

Item No. 814908 - Bobcat models S130, S150, S160, S175, S185, T140, T190, wt. of kit is 6 lbs.

Item No. 815105 - Case, for most 1835, 1835B, 1835C, 1840, 1845, 1845B, and 1845C skid loaders (with large diameter hydraulic reservoir cap)

Item No. 814915 - Case models 410, 420, 430, 435, 440, 445, 450, 465, 40XT, 60XT, 70XT, 75XT, 85XT, 90XT, 95XT, SR150, TR270, TR320, SV175, SV185, SV250, SV300, and TV380

Item No. 814915 - Thomas, for all models including: 85, 105, 137, 153, 175, 205, 250, 255

Item No. 814915 - For Daewoo for all models including: 430, 440, 450, 460, 1340XL

Item No. 814910 - For John Deere units manufactured prior to 1/1999, models 375, 575, 3375, 4475, 5575

Item No. 814920 - For John Deere early 200 series skid loaders

Item No. 815075 - For John Deere late models 240, 250, 260, 270, and 280 models with screw type hydraulic reservoir cap

Item No. 815075 - For John Deere models 317, 320, 325, 328, and 332 (side panel must be removed)

Item No. 815110 - John Deere models 313, 315, 318D, 319D, 320D, 323D, 326D, 328D, 329D, 332D, 333D, CT315

Item No. 815115 - Kubota models SVL-75 and SVL-90 model,

Item No. 814895 - Gehl, for models SL3635 SX, SL3935 SX, SL4640, SL4840, SL5640, SL6640, SL7810, V270,
V330, V400, V6640, 5240, 3640E, 4240E, 5240E, 5640E, 6640E, RT175, RT210, CT185

Item No. 814940 - Mustang, for models 2022, 2032, 2040, 2050, 2060, 2070, 2044, 2054, 2066, 2099

Item No. 814895 - Mustang, for models 2026, 2041, 2076, 2086, 2109, 2700V, 3300V, 1750RT, 2100RT, MTL325

Item No. 814910 - New Holland models LS120, LS125, LS140, LS150, LS160, LS170, LS175, LS180, LS185.B, LS190.B,
C175, C185, C190, L553, L554, L555, L781, L783, L784, LX665, L865, LX885, LX985

Item No. 815055 - New Holland models L213, L215, L218, L220, L223, L225, L230, C227, C232, C238