Model 30EX-HD Flail Type Brush Mulcher Head For Backhoes and Excavator arms
Click To Enlarge

30EX-HD Flail Mower Head

Price: $9,899.00
  • Item #: 30EX-HD
* Marked fields are required.
Qty: *

FREE SHIPPING ON THIS ITEM to locations with normal delivery access in the continental U.S. 48 states; locations in Alaska, Hawaii, and outside the U.S. require additional shipping cost, e-mail us for a shipping quote if needed.

Prices listed are for payment by credit card.*

Cash Discount:  All orders paid by check or money order qualify for a 5 percent cash discount. 

Enter discount code CD5 at checkout in the coupon box to calculate your cash discount price.

*We have a credit card sales limit of $2500.00 or less.  All orders over $2500.00 should be paid for by personal, business, or cashier's check or postal money order only.

All items paid for by credit card and shipped by UPS are sent signature required.  If no one will be at the location for delivery, then payment should be by check, so the package can be delivered without a signature.

Someone must be at the location on all shipments sent by motor freight (truck).


Excavator Mounted Brush Shredder

The Brush Hound Excavator Mounted Brush Shredder safely cuts and mulches small trees, grass, and brush. The Brush Hound Flail Blade Cutting Head turns any excavator or backhoe into a long reach boom mower. Three widths are available, 30 inch, 40 inch and 50 inch working width cutter heads. The large 2 pound reversible, spiral mounted blades will cut and mulch trees and limbs up to 4 inches in diameter on the model 30 EX and 40EX, 6 inches in diameter on the model 40EX-HD, and up to 8 inches in diameter on the model 50EX-HD. Excavators under 16,000 lbs. in weight and with hydraulic system pressures with a relief valve at 3400 psi should use the 30EX or 30EX-HD models. These units use a hydraulic gear type motor with a maximum pressure capacity of 3400 psi.. Excavators larger than 16,000 lbs. and with a relief valve pressure above 3400 psi should us the 40EX, 40EX-HD or 50EX-HD models with a higher capacity piston type motor with a maximum pressure capacity of 5000 psi maximum.

Three widths are available - the 30 series model has a working with of 30 inches (overall cutting head width of 40 inches), 40 series models have a working width of 40 inches (overall width of 50 inches, 58 inches on the 40EX-HD), and the 50EX-HD model has a working width of 50 inches and a working width of 63 inches.

Working width 30 inches

Overall length 56 inches

Overall width 33.5 inches

Height 29 inches without mount

Operating weight 850 lbs without mount

Available knives are the triple hammer knives two curved with a straight knife in between, number of knives: 27 = 18 - 2.25 lb. cuved style; 9 - 2.0 lb. straight knives, total weight of knives is 63 lbs.  

Maximum cutting capacity 4 inches in diameter

Hydraulic flow range is 18-38 gpm

Adaptability: Not recommended for machines over 16k gross weight with auxilliary hydraulic systems 4350 psi or higher

Standard universal bolt-on mount included, we will send you a diagram with the measurements needed to fabricate the mount

See the drop down menu on the order page if you need a WainRoy or Tag style coupler (extra charge for these couplers, see the drop down menu).

Thumb saddle provides a pinch point for the machine's thumb to make contact with to pickup obstacles or debris

Tripple flail knives efficiently cut through wood, vines, grass, and brush, 63 lbs. of cutters spinning at 2000 rpms +

Universal mount - Versitile heavy-duty mounts are adjustable and are built to match your machine style lugging

Side safety chains - contains debris within the housing that could be thrown during operation

Knife retention: 1 inch grade 8 bolts hold the knives with a castle style nut and hardened roll pin

Reversible cutter drum: smooth and vibration free utilizing Rock Hound's exclusive "True-Shaft" technology

Wire Proof Bearing Protectors: Protect drive components from being wrapped with wire rope or fencing

Exceeds SAE J1001 Standards: durability and safety test for flail mowers including impact and vibration testing

Composite dampener washer: Protects hydraulic motor from shock forces encountered during operation

Universal bolt on excavator bucket style mount, high strength welded steel unitized structure using grade 8 attachment bolts with wear washers, and a wire proof hardened cutter shaft protectors

Replaceable, hardened, skid shoes

Optional thumb saddle and ground roller available

Optional adjustable height ground roller available for all models